Features of AE 9000 Multifunction Meter
- Fully programmable CT and PT ratio (Primary / Secondary).
- Fully programmable selection of three phases 3 wire or 4 wire configuration.
- Programmable Single & Three phase system configuration.
- The true RMS measurement.
- Display and communication of up to 67 parameters through 38 screens/pages.
- KVA & KW Demand Measurements. The demand interval can be set from 5 to 30 minutes.
- Password protection.
- Simultaneously three parameters can be view
- Total Voltage or Current `)/0 THD measurement.
- Phase angle & Phasor angle measurement.
- Separate registers for Import and Export energy measurement.
- Energy summation (Import + Export) for Active, Reactive, and apparent Energy.
- Display Previous Energies (before the energies were reset).
- Neutral Current Measurement.
- RS 485 interface for configuration, communication, and downloading purposes.
- Confirm to IP54 (front face)
- Run Hr. & ON Hr display.
- LED and Memory test facility.
- High-quality LED display.
- Simple menu driven.
- EMS Software is available (optional).
- Real-Time clock
- Universal Auxiliary Power Supply.
- Recording and display of Minimum Voltage and current values.
- Recording and display of Maximum Voltage and current values.
Specifications
| Type : | 1 / 3-Phase-3-wire/ 4wire, (Programmable through front panel Switches). |
| Input voltage VAC : | 110V or 440 V ( L-L ) |
| Voltage Overload : | 1.5 times for 10 sec |
| Input Current A AC : | 1A or 5A |
| Current Overload : | 50A max for 3 sec |
| Auxiliary supply : | AC / DC: 85 V – 300 V. |
| Burden : | For Voltage / Current – 0.2 VA max per Volt/Amp input, |
| Frequency : | 45 Hz – 55Hz |
| Resolution : | RMS 4 digit, Integral 8 digit |
| Accuracy Class : | 1.0 (optional: 0.5S). |
| RS485 communication : | Two wire half duplex Baud Rates- 4800, 9600, 19200, 38400. |
| Isolation : | 2k VAC isolation for lmin. between communication and other circuit. |
Wiring Diagram
