DR-75-24 Din Rail Switching Power Supply

Din Rail Switching Power Supply is a switching power supply mounted on a DIN rail. It can be used in applications such as industrial automation, robot control, and communication equipment to provide a stable power supply for equipment. It has the characteristics of high efficiency, high reliability and small size.

Contact us

Feature

  • Soft-start current can reduce the AC input impact effectively
  • With short-circuit and overload protection
  • 100% full-load burn-in test
  • Installed with EMI filter, minimum wave

 

Specification

Model DR-75-24
OUTPUT DC VOLTAGE 24V
RATED CURRENT 3.125A
CURRENT RANGE 0 ~ 3.125A
RATED POWER 75W
RIPPLE&NOISE(Max) 100mVp-p
VOLTAGE ADJ.RANGE 24 ~ 30V
VOLTAGE TOLERANCE ±1.0%
LINE REGULATION ±0.5%
LOAD REGULATION ±1.0%
SETUP,RISE TIME 500ms、30ms/230VAC 1000ms,30ms/115VAC(full load)
INPUT VOLTAGE RANGE 85~264VAC , 120~370VD
FREQUENCY RANGE 47~63Hz
EFFICIENCY(Typ.) 0.85
AC CURRENT(Typ.) 0.7A/115VAC 40A/230VAC
INRUSH CURRENT(Typ.) COLDSTART: 60A/230V
LEAKAGE CURRENT <1mA/240VAC
PROTECTION OVER
LOAD
105 ~ 150% rated output power
Protection tye:Hiccup mode,recovers automatically after fault condition is removed
OVER
VOLTAGE
28.4~32.4V
Protection type : Shut down o/p voltage, re-power on to recover
ENVIRONMENT WORKING TEMP -10 ~ +60°C
WORKING HUMIDITY 20~90%RH
STORAGETEMP.,HUMIDITY -20 ~ +85°C, 20 ~ 90% RH
VIBRATION Component : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY SAFETY STANDARDS CE,GB4943.1safety standard
WITHSTAND VOLTAGE I/P-O/P:1.5KVAC 1minute I/P-FG:1.5KVAC 1minute O/P-PG:0.5KVAC 1minute
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100MOhms/500VDC
EMC EMISSION EN61000-3-2:2014/EN61000-3-3:2013
EMC IMMUNITY EN 55032:2015/EN55035:2017/60950-1
OTHERS MTBF ≥327.9K hrs MIL-HDBK-217F(25°C)
DIMENSION 100*55.5*125.2mm