E810 (4RS1E)- Ethernet RS232 Converter

Contact us
Category:

Feature

  • Four channels of 485/232/422 and RJ45 Ethernet data transparent transmission;
  • Modbus-RTU to Modbus-TCP available;
  • AT command is configurable;
  • Web page configuration available;
  • The hardware watchdog is with high reliability;
  • The power supply has good functions such as over-current, over-voltage, and anti-reverse connection;
  • Wide voltage input 8V-28V, 12V or 24V is recommended.

Specifications

 

No.

Specification and

characteristic

 

Description

 

1

Supply voltage 8 ~ 28V DC, note: higher than 28V will cause permanent damage to the device, 12V or 24V power supply is

recommended

 

2

Working current  

180.7mA@12V(RS232) ,176.8mA@12V(RS485) ,173.8mA@12V(RS422)

3 Operating mode Asynchronous half-duplex or asynchronous full-duplex
 

4

 

Interface mode

RS232:Network port type connector,The line sequence is introduced as follows RS485/RS422:1*5*3.81,Crimping method

RJ45:Network port

5 Transmission medium Network cable / twisted pair or shielded wire
 

6

 

Serial port standard

RS232:1200~115200bps

RS485/RS422:1200~460800 bps

 

7

Network port

specification

 

RJ45,10/100Mbps

8 Network protocol IP、 TCP/UDP、 ARP、 ICMP、 IPV4
9 IP access method Static IP 、 DHCP
10 DNS Support
11 User configuration Web page configuration,default username:admin, default password:admin
 

12

Simple transparent

transmission method

 

TCP Server 、TCP Client 、 UDP Server 、 UDP Client

 

13

 

TCP Server connection

Supports up to 4 TCP connections
14 Operating temperature -40 ~ +85℃,Industrial grade
15 Operating humidity 10% ~ 90%,Relative humidity, non-condensing
16 Storage temperature -40 ~ +125℃,Industrial grade
17 Average weight 416g
18 Size 150*107*29