PFC Switching Power Supply

QP-150 series PFC Switching Power Supply

This PFC Switching Power Supply is a power conversion device used to convert electrical energy from one form to another. It is a common power supply method and is widely used in various electronic devices and circuits.

Contact us
Category:

Feature

  • Universal AC input / Full range
  • Built-in active PFC function, PF>0.95
  • Protections: Short circuit / Over load / Over voltage
  • Forced air cooling by built-in DC fan
  • CH4:±Polarity is selectable
  • Fixed switching frequency at 100KHz
  • 3 years warranty

 

Application

  • Industrial control system
  • Mechanical and electrical equipment
  • Electronic instruments
  • Test and measurement instrument
  • Laser related machine
  • Charging related equipment
  • Household appliances
  • Power Sourcing Equipment of PoE

 

Specification

 

MODEL QP-150-3A QP-150-3B QP-150-3C
 

 

 

 

 

 

 

 

OUTPUT

 OUTPUT NUMBER CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
DC VOLTAGE 5V 3.3V 12V -5V 5V 3.3V 12V -12V 5V 3.3V 15V -15V
RATED CURRENT 10A 10A 5A 0.6A 10A 10A 5A 0.6A 10A 10A 4A 0.6A
CURRENT RANGE 3 ~ 15A 0 ~ 15A 0.4 ~ 5A 0 ~ 1A 3 ~ 15A 0 ~ 15A 0.4 ~ 5A 0 ~ 1A 3 ~ 15A 0 ~ 15A 0.4 ~ 5A 0 ~ 1A
RATED POWER (max.) 146W 150.2W 152W
RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p
VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V           CH2: 3.14 ~ 3.63V CH1: 4.75 ~ 5.5V           CH2: 3.14 ~ 3.63V CH1: 4.75 ~ 5.5V           CH2: 3.14 ~ 3.63V
VOLTAGE TOLERANCE Note.3 ±3.0% ±3.0% ±6.0% ±5.0% ±3.0% ±3.0% ±6.0% ±5.0% ±3.0% ±3.0% +8,-6% ±5.0%
LINE REGULATION ±1.0% ±1.0% ±2.0% ±1.0% ±1.0% ±1.0% ±2.0% ±1.0% ±1.0% ±1.0% ±2.0% ±1.0%
LOAD REGULATION ±2.0% ±2.0% ±6.0% ±2.0% ±2.0% ±2.0% ±6.0% ±2.0% ±2.0% ±2.0% ±6.0% ±2.0%
SETUP, RISE TIME 800ms, 50ms/230VAC            1800ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.) 24ms/230VAC           24ms/115VAC at full load
 

 

 

 

INPUT

 VOLTAGE RANGE 90 ~ 264VAC           127 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF>0.95/230VAC         PF>0.98/115VAC at full load
EFFICIENCY (Typ.) 73% 75% 74%
AC CURRENT (Typ.) 2.5A/115VAC           1.2A/230VAC
INRUSH CURRENT (Typ.) COLD START ≦40A/230V
LEAKAGE CURRENT <3.5mA / 240VAC
 

 

 

PROTECTION

  

OVERLOAD

 105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
 

OVER VOLTAGE

 CH1:5.75 ~ 6.75V            CH2:3.8 ~ 4.4V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE(OPTION) Shut down o/p voltage, recovers automatically after temperature goes down
 

 

 

ENVIRONMENT

 WORKING TEMP. -10 ~ +60℃ (Refer to “Derating Curve”)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT ±0.03%/℃ (0~50℃)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
 

SAFETY & EMC

(Note 4)

 SAFETY STANDARDS UL60950-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020
 

OTHERS

 MTBF 1763.3K hrs min.       Telcordia SR-332 (Bellcore) ; 262.6K hrs min.       MIL-HDBK-217F (25℃)
DIMENSION 199*99*50mm (L*W*H)
PACKING 0.93Kg; 20pcs/19.6Kg/1.21CUFT
NOTE 1.  All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2.  Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3.  Tolerance : includes set up tolerance, line regulation and load regulation.

4.  The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on      a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMl testing of component power supplies.” (as available on http://www.meanwell.com)

5.  The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft}.

 

 

Related products