Multiturn encoder TRT58/S3 SIL2/PLd

Recording of the angular position and revolutions using Hall sensors – absolute multiturn transmission for up to 4096 revolutions – data output plus parameterisation and diagnosis via PROFINET.

Robust housing manufactured from seawater-resistant aluminum or stainless steel – stainless steel shaft – ball bearing with radial shaft seal-sensor circuit consisting of ASIC with Hall elements – electrical connection via M12 connector or cable outlet.

Contact us

Specifications of Multiturn encoder TRT58/S3 SIL2/PLd

Product category: Rotary encoders
Inkremental or absolute: Absolute
Single- or Multiturn: Multiturn
Design: 58 mm
Flange and shaft: Clamped flange, shaft 10 mm with disk spring
Clamped flange, shaft 10 mm with flattened area
Clamped flange, shaft for measurement gear ZRS
Synchroniser flange, clamped shaft 12 mm with groove for feather key
Synchroniser flange, shaft 6 mm with flattened area
Synchroniser flange, shaft 12 mm with feather key
Housing material: Aluminium
Burnished steel for shielding strong magnetic fields
Stainless steel 1.4305
Stainless steel 1.4404
Stainless steel 1.4521 for shielding strong magnetic fields
Resolution: 4096 steps/360°
8192 steps/360°<)
65536 steps/360°<)
Code type: Binary code, position value as double word (e.g. for Simatic TIA portal with safety advance)
Binary code, position value subdivided amongst two words
Binary code, position value subdivided amongst two words, 1st word multiturn data, 2nd word single-turn data, resolution not adjustable
Profile: PROFIsafe, SIL2
Electrical connection: 3 axial connector
Cable outlet radial
Connector outlet radial
Standard, 3 connectors, radial
Interface: PROFIsafe over PROFINET
Electrical and/or mechanical variant: Standard
Certification: EX protection (Atex)
Special feature: EX-protection
Speed monitoring