Features
- 1-channel Temperature/mV/Ohm Input, 1 ch. Current Output
- 4-way isolation eliminates potential ground loops between power, Inputand network circuitry
- The input signal type & measurement range can be programmed setting by ZPconfig software through USB adaptor
- Hot Swappable
- Low Power Loss, Low Temperature Drift, Auto Zero Calibration
- Terminal Block & Rail bus redundant power
- Standard Modbus RTU protocol with high-speed RS-485 communication (up to 115K bps)
- Combine with MWG1 to constitute a remote I/O DAS support both of MODBUS RTU and MODBUS TCP protocols
Specification
◆ RS485 (Master) :
Protocol: Modbus RTU，ZPBUS
Support up to 31 I/O models
Data Format: 1 Start Bit. 8 Data bits.no Parity.1 Stop Bit
Analog Input Channels: MAX 60
Discrete Input Channels: MAX 60
Analog Output Channels: MAX 60
Discrete Output Channels: MAX 60
◆ RS485 （Slave）
Protocol: Modbus RTU
Address ID range: 1~254
Data Format: 1 Start Bit. 8 Data bits.no Parity.1 Stop Bit
◆ RJ45 (10BaseT/100Base TX)
Protocol: Modbus TCP, TCP/IP, http
Modbus TCP（client）：6 connections
http (client) : 2 connections
◆ Power Supply：24VDC±10% or AC
◆ A/D resolution：24 bit
◆ 4-way isolation between RS485(master)/RS485(slave) /RJ45/Power Supply：≥1500VAV/1min
◆ 4-way isolation resistance：≥100Mohm/500V
◆ Operation Temperature：-10~70°C
◆ Storage Temperature：-40~85°C
◆ Relative Humidity：5-95% non-condensing
◆ EMC：EN1326: 1997+A1：1998+A2：2001+A3：2003
◆ Power Loss: 1.2 W
◆ Weight: 95g
Dimension
