Features
- Modular, plug-in components (head, body and receptacle) provide application flexibility, reduced inventory and less downtime
- Manufactured to take the physical and environmental abuse (including cutting fluids and chemicals) of harsh industrial environments
- Chemical-resistant Viton gaskets, seals and boots are standard, and so are captive, posi-drive screws
- The switches have terminal identification on the nameplate for a visual wiring checkout without guesswork. Heads and switch bodies can be replaced without rewiring
- Standard 5° pre-travel and 90° total travel
- 24–120 Vac/dc LED and 120 Vac neon indicating lights available
- Rotary heads are field convertible CW, CCW, or both, without special tools
- Epoxy filled, pin connector or pigtail pin connector receptacles available
Specification
- Universal U.S./DIN mounting dimensions：1.16 in (30 mm) x 2.34 in (60 mm)
- Conduit entrance ： 2 in NPT or 20 mm threading
- Maximum frequency of operation ：000 operations per hour Mechanical life
- Side rotary： 000,000 operations minimum
- Side or top push ：0,000,000 operations minimum Electrical life
- Single-pole：1,000,000 operations typical at full load
- Two-pole：100,000 operations typical at full load
- Ambient temperature range—standard
- Standard without cable 14° to 250°F (–10° to 121°C)
- Standard with cable 14° to 221°F (–10° to 105°C)
- Low temperature without cable：–40° to 250°F (–40° to 121°C)
- Side rotary Within 0.0014 in
- Torque requirements:
- Switch body screws：25–30 lb-in
- Operating head screws：14–18 lb-in
- Wire size Will accept AWG #22–#12, single or stranded wire
