Specification
Network rated voltage | 0…600 V – AC at 45…440 Hz (device connected to neutral) 0…480 V – AC at 45…440 Hz (device connected to phase) |
---|---|
Type of measurement | Network insulation resistance |
Threshold setting | Pre-alarm: 2…500 kOhm Alarm: 1…250 kOhm |
Response time | <= 7 s |
auxiliary supply voltage | 110…415 V AC 45…440 Hz +/- 15 % 125…250 V DC +/- 15 % |
Power consumption in VA | 7 VA |
Measurement current | 0…70 µA |
internal impedance | 230 kOhm – AC at 45…440 Hz |
Test function | Remote test Local |
output contact | 1 C/O standard or fail-safe |
breaking capacity | 250 V – AC at 6 A 12…24 V – DC at 6 A |
Communication port protocol | – |
Mounting mode | Clip-on Flush-mounted |
Mounting support | DIN rail Panel |
Mounting position | Horizontal Vertical |
Connections – terminals | Tunnel type terminals0.2…2.5 mm² |
Material | Thermoplastic |
net weight | 0.2 kg |
Height | 90 mm |
Width | 71 mm |
Depth | 67.5 mm |
IP degree of protection | Case: IP20 Front face: IP40 |
---|---|
Environmental characteristic | Exposure to damp heat not in service conforming to IEC 60068-2-30 Exposure to damp heat in service conforming to IEC 60068-2-56 Salt mist conforming to IEC 60068-2-52 |
Type of installation | Indoor |
Standards | IEC 61557-8 IEC 60664-1 |
Product certifications | EAC CE BV RMRS DNV |
Ambient air temperature for operation | -25…55 °C |
ambient air temperature for storage | -40…70 °C |