iMAG 4700 Seametrics Fow Meter

The iMAG-Series Seametrics Fow Meter is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling, it is available in 2” to 12” pipe in municipal or industrial water/ wastewater and reclaimed water applications. Pump station, pump skid, and packaged plant applications are also suitable. Minimal  straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow.

Contact us
Category:

Features

  • Now Available for 2″ to 12″ line sizes!
  • Battery or external DC power versions
  • Minimal straight pipe
  • Meter-mounted rate/total indicator
  • Pulse output standard
  • Additional optional output (DC version) 4-20mA loop, HART/4-20mA, or Modbus
  • Optional data logger
  • Use in water & wastewater treatment, municipalities, pump skids, pump stations, packaged plants, filtration systems, reclaimed water, hydraulic fracturing
  • NSF-61 approved, IP68 rated
  • iMAG-4700p and iMAG4700r models are also available

Specifications

Pipe Sizes 2”, 3”, 4”, 6”, 8”, 10”, 12”
Flanges 150 lb. ANSI Pattern
Pressure 150 psi (10.3 bar) line pressure
Temperature Operating 10˚ to 140˚ F (-12˚ to 60˚ C)
Humidity Humidity 0-90% RH to 60˚ C, altitude 2000m
Storage -40˚ to 158˚ F (-40˚ to 70˚ C)
Accuracy ±0.75% of reading on iMAG 4700p and 4700r (±1.0% iMAG 4700), ±0.025% of full-scale flow from low flow cutoff to maxi. flow rate of 10 m/sec
Low Flow Cutoff 0.5% of maximum flow rate
Material Body (2”-12”) Welded steel, epoxy-coated
Liner (2”, 3” & 8”) Polyurethane/Noryl®
Liner (4”, 6”, 10” & 12”) Santoprene flange/Polypropylene liner body
Electronics Housing Powder-coated diecast aluminum
Electrodes 316 stainless steel standard/ Hastelloy optional
Display Type 128×64 dot-matrix LCD
Digits 5 Digit Rate 8 Digit Total
Units

Please Note:

All iMAG meters are factory set for gallons per minute (GPM) rate and gallons total. If other units are required, they can be set in the field.

Rate Volume Units Rate Time Units Total Volume Units
Gallons Liters

Barrels(42 gal) Cubic Feet Cubic Meters

Million Gallons2 Mega Liters2 Imperial Gallons Million Imperial

Gallons2

Second Minute Hour Day Gallons Gallons x 10

Gallons x 100

Gallons x 1000 Million Gallons Liters

Kilo Liters Mega Liters

Barrels (42 gal) Cubic Meters Cubic Meters x 1000 Cubic Feet

Cubic Feet x 100 Cubic Feet x 1000 Second Foot Day Million Cubic Feet

Acre Feet

Acre Inches Imperial Gallons Imperial Gallons

x 1000

Million Imperial

Gallons Fluid Ounces

Bidirectional1 Forward Total, Reverse Total, Net Total, Batch Forward Total, Batch Reverse Total3
Power4 DC Power 9-36 Vdc @ 250 mA max, 30 mA average supplied from secondary non-hazardous live source
Battery Backup

(Not for use as primary power)

DC powered units: One lithium 7.2V ‘D’ size battery pack, replaceable. AC powered units: One 9V alkaline battery, replaceable.
AC Power 100-240Vac, 50/60Hz, 0.12A (iMAG 4700r and 4700p only) Overvoltage category II
Battery One lithium 7.2V ‘D’ size battery pack, replaceable. (iMAG 4700 only)
Scaled Pulse Output Signal Current sinking pulse, isolated, 36 Vdc at 10 mA max
Pulse Rates User-scalable from 0.1 to 99,999.9 volume units/pulse. Pulse width is one-half of pulse period with minimum pulse width of 2.5 ms, 200 pulses/sec max. For battery option meters, pulse width varies with frequency, 150 pulses/sec max.
Options 4-20mA Current Loop Isolated, passive, 24Vdc, 650 Ω maximum current loop
High Speed Digital Isolated, open collector, 24 Vdc (iMAG4700p only)
Serial Communications Isolated, asynchronous serial RS485, Modbus® RTU protocol
Sensus Smart Output Connects to Sensus SmartPoint
Cable Power/Output Cable 20ft (6m) standard length polyurethane jacketed cable—for power and outputs (lengths up to 200’ available).
Remote Display Cable 20ft (6m) standard length polyurethane jacketed cable—for connection between meter and remote display (lengths up to 200’ available). (iMAG 4700r)
Conductivity >20 microSiemens/cm
Empty Pipe Detection Hardware/software, conductivity-based
Regulatory (EN 61326), 2”-12” certified to NSF/ANSI standard 61 60°C (140°F), CSA/CUS
Environmental NEMA 6P, CSA 6P, IEC 60925 IP68 (10ft (3m) depth, continuously) Pollution degree 4, stability fixed/built in