ISOM Digiware L-60h is a powerful and reliable insulation monitoring device that provides reliable protection for electrical safety in medical facilities. It evaluates the insulation condition by measuring the leakage current of medical IT systems.
Features
- Insulation monitoring: Automatically measuring the insulation level of single-phase or three-phase medical IT arrangement networks.
- Current and temperature monitoring: Measuring current with current sensors, and measuring temperature with a PTC temperature sensor. Temperature threshold alarm and current threshold alarm are available.
- Locating signal injection: Search signal limited to 1 mA and synchronized with the ISOM Digiware F-60 locating unit via Digiware bus.
- Compliance with standards: Complies with international standards such as IEC 61557-8, IEC 61557-9, and ISO 14025.
- Easy to use: plug-in design, easy installation; configurable input/output, remote monitoring possible.
Specification
| Parameter | Value |
| Network voltage Un | AC 24 to 250 V |
| AC range | 50 to 60 Hz |
| Assigned insulation voltage Ui | 690 V |
| Auxiliary power supply Us | Digiware bus |
| Power supply voltage | 2.3 W |
| Output contacts | |
| Number of contacts | 2 |
| Contact type | Changeover switch |
| AC nominal voltage | 250 V |
| DC nominal voltage | 30 V |
| Steady-state current | 5:00 AM |
| Operating mode | Standby/On |
| Preset operating mode | Standby |
| Fault alerts | |
| Number of thresholds | 1 |
| Type of threshold | Adjustable |
| Value of the threshold | 50 kΩ to 500 kΩ |
| Max. leakage capacity | 10 µF |
| Operating conditions | |
| Operating temperature | -10 to +55 °C |
| Storage temperature | -40 to +85 °C |
| Relative humidity | 95% at 55 °C |
| Inputs/outputs | |
| Number of I/O | 4 |
| Types of I/O | Adjustable |
Dimension
Wiring
