Feature
- Soft-start current can reduce the AC input impact effectively
- With short-circuit and overload protection
- 100% full-load burn-in test
- Installed with EMI filter, minimum wave
Specification
| Model | LRS-150-12 | |
| OUTPUT | DC VOLTAGE | 12V |
| RATED CURRENT | 12.5A | |
| CURRENT RANGE | 0 ~ 12.5A | |
| RATED POWER | 150W | |
| RIPPLE&NOISE(Max) | 150mVp-p | |
| VOLTAGE ADJ.RANGE | 10.5~ 13.8V | |
| VOLTAGE TOLERANCE | ±1.0% | |
| LINE REGULATION | ±0.5% | |
| LOAD REGULATION | ±0.5% | |
| SETUP,RISE TIME | 500ms, 30ms/230VAC500ms, 30ms/115VAC(full load) | |
| HOLD UP TIME（Typ.) | 40ms/230VAC35ms/115VAC (fullload) | |
| INPUT | VOLTAGE RANGE | 85 ~ 132VAC/170 ~ 264VACselected by switch240~370VDC(switch on 230VAC) |
| FREQUENCY RANGE | 47~63Hz | |
| EFFICIENCY(Typ.) | 0.9 | |
| AC CURRENT(Typ.) | 1.9A/115VAC 1.2A/230VAC | |
| INRUSH CURRENT(Typ.) | COLD START 65A/230VAC | |
| LEAKAGE CURRENT | ＜0.75mA/240VAC | |
| PROTECTION | OVER LOAD |
110~150% rated output power |
| Protectiontype:Hiccup mode,recoversautomaticallyafterfaultconditionisremoved | ||
| OVER VOLTAGE |
28.8~33.6V | |
| Protection type:Shut down o/p voltage, re-power on to recover | ||
| ENVIRONMENT | WORKING TEMP | －20~70℃（Refer to “derating curve”) |
| WORKING HUMIDITY | 20~90%RH non-condensing | |
| STORAGETEMP.,HUMIDITY | -45 ~ +85°C, 20% ~ 95% RH non-condensing | |
| TEMP.COEFFICIENT | ±0.03%/°C (0 ~ 50°C) | |
| VIBRATION | 10 ~ 500Hz, 2G10min/1cycle,60min.eachX、Y、Zaxes | |
| SAFETY | SAFETY STANDARDS | GB4943.1, EN60950.1APPROVED |
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100MOhms / 500VDC / 25°C/ 70% RH | |
| EMC EMISSION | Compliance toEN61000-3-2:2014/EN61000-3-3:2013 | |
| EMC IMMUNITY | Compliance toEN55032:2015/EN55035:2017/60950-1 | |
| OTHERS | MTBF | ≥763.6K hrs MIL-HDBK-217F(25°C) |
| DIMENSION | 134*97*30mm (L*W*H) | |
