Phoenix Contact Current Transducer

MACX MCR-SL-CAC- 5-I Phoenix Contact Current Transducer

The Phoenix Contact Current Transducer is designed to handle both 1 A and 5 A AC currents, with an output signal range of 0 to 20 mA or 4 to 20 mA. Configuration is easily achieved using a DIP switch, and the operational mode is indicated by an LED.

Contact us
Category:

Specification of MCR-SL-CAC- 5-I  Contact Current Transducer

Maximum power dissipation for nominal condition 1.2 W
Protective circuit Surge protection; 35 V suppressor diode
Step response (10-90%) ≤ 300 ms
200 ms
Maximum temperature coefficient < 0.02 %/K
Temperature coefficient, typical < 0.015 %/K
Maximum transmission error ≤ 0.5 % (of nominal range value under nominal conditions)
Reverse polarity protection yes
Rated insulation voltage 300 V AC (to earth)
Electrical isolation Input/output
Test voltage 4 kV AC (50 Hz, 60 s)
Electrical isolation Output/supply
Test voltage 2 kV AC (50 Hz, 60 s)
Supply
Nominal supply voltage 24 V DC -20 % … +25 %
Supply voltage range 19.2 V DC … 30 V DC
Max. current consumption < 32 mA (at UB=24 V DC, IOUT=20 mA)
Power consumption < 0.9 W (at UB=24 V DC, IOUT=20 mA)

Related products