Feature
- Soft-start current can reduce the AC input impact effectively
- With short-circuit and overload protection
- 100% full-load burn-in test
- Installed with EMI filter, minimum wave
Specification
| Model | MDR-20-24 | |
| Output | DC output Voltage | 24V |
| Voltage tolerance | ±1.0% | |
| Rated Current | 0.83A | |
| Related Power | 20w | |
| Wave&Noise | 150mVp-p | |
| Voltage adjust range | 48-56V | |
| Set up,rise time | 500ms 30ms/230VAC 1000ms,30ms/115VAC at full load | |
| hold up time | 50ms/230VAC 20ms/115VAC at full load | |
| Input | Voltage Range | 85 ~ 264VAC 47-63HZ 120-370VDC |
| Input Current | 0.55A/115VAC 0.35A/230VAC | |
| Efficiency | 0.84 | |
| AC inrush current | Cold start current 35A/115V 70A/230VAC | |
| Leakage current | <1mA/240VAC | |
| Protection | Over load | Above 105%-160% rated output power |
| hiccup mode, recovery automatically after fault condistion is removed | ||
| Over voltage | 57.6-64.8V | |
| Shut down o/p voltage, re-power on to recover | ||
| Function | DC OK active single | Relay contact rating(max) :30V/1A resistive |
| Environment | Working temp humidity | -20~+70°C 20%~90%RH |
| Stor temp, humidity | -20~+85°C 20%~90%RH Non-condensing | |
| Safety | Safety standards | UL508,TUV EN60950-1 approved |
| Withstand voltage | I/P-O/P:3KVAC I/P-FG:2KVA O/P-FG:0.5KVA | |
| Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25 %RH | |
| EMC emission | Compliance to EN55011,EN55022,EN61204-3 class B,EN61000-3-2,-3 | |
| Size | Size | 22.5*90*100mm W*H*D |
| Package | 0.32kg | |
