The MIC-600-S-4-W multi-gas analyzer is a cutting-edge gas detector designed to meet the diverse needs of industrial and environmental applications. With its advanced circuit design and customizable configurations, it offers reliable and flexible gas monitoring for a wide range of scenarios.
It offers a comprehensive range of measurement scales, including 0-1, 10, 100, 1,000, 5,000, 10,000, 50,000 parts per million (ppm), 0-100% percent lower explosive limit (LEL), and 0-5%, 30%, or 50% percent volume, with customizable options available to meet specific application requirements.
Feature of MIC-600S-4-W Multi Gas Analyzer
- Optional simultaneous detection of 1 to 4 gases: TVOC, O2, Co2, etc.
- Optional LOT modules: Remote online alarm and data analysis from PC and mobile phone. 4G transmission, Bluetooth transmission LORA transmission, WiFitransmission, and GPS Location are available.
- Multi-protection design: It is made of a Die-cast aluminum shell so this gas analyzer is IP6 protection grade, dustproof, waterproof, explosion-proof, and explosion-proof grade. Besides, this gas analyzer is equipped with overvoltage protection, lightning protection, anti-reverse connection, anti-surge protection, and anti-static protection. The sound-light alarms are optional.
- Three display interfaces: there are single-channel, multi-channel, and real-time curve display interfaces.
- Three optional diffusion types: Optional pipe type, flow type, and pump type.
- Remote control: Infrared remote control in hazardous situations
Specification of MIC-600S-4-W Multi-Gas Analyzer
| Parameter | Specification |
| Gas Detection | Customizable, supports the detection of 1 to 4 gases simultaneously |
| Detection Range | Configured according to on-site environment and requirements |
| Resolution | Configured according to on-site environment and requirements |
| Sensor Types | Electrochemical, catalytic combustion, infrared, thermal conductivity, PID photoionization |
| Sensor Lifetime | Electrochemical: 2 years, Infrared/Thermal: 5–10 years, Catalytic: 3 years, Thermal: 5 years, PID: 10,000 hours |
| Temperature Detection | -40°C to 120°C (optional); Humidity: 0–100% RH (optional) |
| Detection Accuracy | ≤±2% FS (within full range ≤2%), Temperature: ±0.5°C, Humidity: ±3% RH |
| Installation Method | Fixed, wall-mounted, pump-suction, or flow-through options |
| Response Time (T90) | T90 ≤ 20 seconds |
| Recovery Time | ≤30 seconds |
| Output Signal | RS485 (RTU bus), Optional 3(4)-wire 4–20mA, Wireless transmission |
| Alarm Method | On-site sound and light alarm (optional), default: 1 passive contact (dry contact) output |
| Operating Temperature | -40°C to 70°C |
| Storage Temperature | -40°C to 70°C |
| Relative Humidity | 10–95% RH (non-condensing environment) |
| Operating Voltage | Standard power supply: 24V, 1A or more DC switching power supply |
| Explosion Protection | Exd II CT6 |
| Protection Rating | IP66 (dustproof, waterproof, and rain-resistant) |
| Dimensions (mm) | 210 x 170 x 85 |
| Weight | 1.8 kg |
| Application Scenarios | Petrochemical, chemical, pharmaceutical, environmental protection, flue gas analysis, air treatment, and other scenarios |
Gas Detection of MIC-600S-4-W Multi-Gas Analyzer
|
Gases to be detected
|
Range
|
Accuracy
|
Resolution
|
Response time T90
|
|
Ammonia gas ( NH3 )
|
0-100ppm
|
＜±2%(F.S)
|
0.01ppm
|
≤30 seconds
|
|
Combustible gas ( EX )
|
0-100%LEL
|
＜±2%(F.S)
|
0.1%LEL
|
≤10 seconds
|
|
Methane ( CH4 )
|
0-100%Vol
|
＜±2%(F.S)
|
0.1%Vol
|
≤10 seconds
|
|
Oxygen gas ( O2 )
|
0-30%Vol
|
＜±2%(F.S)
|
0.01%Vol
|
≤10 seconds
|
|
Nitrogen gas ( N2 )
|
0-100%Vol
|
＜±2%(F.S)
|
0.01%Vol
|
≤10 seconds
|
|
Hydrogen sulfide ( H2S )
|
0-100ppm
|
＜±2%(F.S)
|
0.01ppm
|
≤30 seconds
|
|
Sulfur dioxide ( SO2 )
|
0-100ppm
|
＜±2%(F.S)
|
0.01ppm
|
≤30 seconds
|
|
Nitric oxide ( NO )
|
0-100ppm
|
＜±2%(F.S)
|
0.01ppm
|
≤30 seconds
|
|
Nitrogen dioxide ( NO2 )
|
0-100ppm
|
＜±2%(F.S)
|
0.01ppm
|
≤25 seconds
|
Application of MIC-600S-4-W Multi-Gas Analyzer
This multi gas analyzer is suitable for petroleum, chemical, pharmaceutical, environmental protection, flue gas analysis, air treatment, and other occasions that require fixed installation and online gas concentration detection.
Wiring
