Feature
- Soft-start current can reduce the AC input impact effectively
- With short-circuit and overload protection
- 100% full-load burn-in test
- Installed with EMI filter, minimum wave
Specification
| Model | MS-15-24 | |
| OUTPUT | DC VOLTAGE | 24V |
| RATED CURRENT | 0.63A | |
| CURRENT RANGE | 0 ~ 0.63A | |
| RATED POWER | 15W | |
| RIPPLE&NOISE(Max) | 150mVp-p | |
| VOLTAGE ADJ.RANGE | 21.6 ~ 26.4V | |
| VOLTAGE TOLERANCE | ±1.0% | |
| LINE REGULATION | ±0.5% | |
| LOAD REGULATION | ±1.0% | |
| SETUP,RISE TIME | 200ms 20ms | |
| HOLD UP TIME(Typ.) | 30ms full load | |
| INPUT | VOLTAGE RANGE | 100~264VAC,43~63HZ or 235~373VDC |
| FREQUENCY RANGE | 47~63Hz | |
| EFFICIENCY(Typ.) | 0.8 | |
| AC CURRENT(Typ.) | 0.35A/230VAC | |
| INRUSH CURRENT(Typ.) | 30A/230VAC | |
| LEAKAGE CURRENT | 0.5mA/240VAC | |
| PROTECTION | OVER LOAD |
110 ~ 135% rated output power |
| Protection type : Hiccuo mode,recovers automatically after fault condition is removed | ||
| ENVIRONMENT | WORKING TEMP | -10 ~ +60°C |
| WORKING HUMIDITY | 20~90%RH | |
| STORAGETEMP.,HUMIDITY | -20 ~ +85°C, 10 ~ 95% RH | |
| TEMP.COEFFICIENT | 0.03%/(0~50) | |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |
| SAFETY | SAFETY STANDARDS | CE,GB4943.1safety standard |
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC 1minute I/P-FG:1.5KVAC 1minute O/P-PG:0.5KVAC 1minute | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100MOhms/500VDC | |
| EMC EMISSION | EN61000-3-2 2014/EN61000-3-3 2013 | |
| EMC IMMUNITY | EN 55032:2015/EN55035:2017/60950-1 | |
| OTHERS | MTBF | 327.9K hrs MIL-HDBK-217F(25°C） |
| DIMENSION | L84*W57*H37.5mm | |
