Features
- A wide range of gases monitored, including hydrogen, carbon dioxide, and argon
- Fast warm-up with rapid response time
- Weatherproof to IP67
- Optional oxygen measurement
- A non-depleting maintenance-free katharometer sensor measures the thermal conductivity of the gas
- A built-in sample pump means that samples can be drawn from low pressure sources or can be naturally aspirated; an integral needle valve and flow indicator are used to control the sample flow through the analyzer
- Dual gas measurement is provided by the KG6050; it combines the measurement abilities of the K6050 with oxygen measurement by the electrochemical cell
- Rugged and portable – true portability is achieved from sealed rechargeable batteries, which offer 6 hours of continuous operation; extended operation is possible by running the unit with the battery charger connected
- A large, alphanumeric LCD shows measured values and also displays messages and prompts for the menu-driven configuration and calibration routines
Applications
- Hydrogenation processes
- Gas purity
- Food processing
- Refrigeration systems
- Power generation/distribution
- Breweries
- Metallurgical atmospheres
- Products of fermentation
Specification
| Display | Dot-matrix LCD showing two or four lines of alphanumeric characters |
| Thermal conductivity ranges and gas types | 0 to 20%, to 0 to 100%, 80 – 100% (alter ranges on application) Carbon dioxide, argon, methane, SF6，0 to 1%, to 0 to 5%, 0 to 20%, 0 to 100% Hydrogen, helium. Consult MTL product line for other gases and ranges |
| Accuracy | ±1% of span (typically) |
| Stability | Better than 1% fsd/month |
| Oxygen measurement ranges (KG6050 only) | 0 to 100%，Resolution: 0.1%，Accuracy: ±0.25% |
| Oxygen cell life | Typically 2 years |
| Speed of response (typical) | Oxygen measurement: 12s (T90) Thermal conductivity measurement: 20s |
| Sample connections | Compression fitting suitable for 0.25 inch (6mm) OD tubing or quick release connector |
| Sample pressure | Pump off: +6 bar G maximum Pump on: –100mb G minimum Higher pressures available on request |
| Sample flow | 100 to 300ml/min for optimum performance |
| Sample temperature | –10 to +55°C (non-condensing) |
| Output | 0 to 1V analogue |
| Ambient temperature | –5 to +40°C |
| Battery capacity | 6 hours |
| Battery chargers – supplied Mains | 240V ac (UK only) Vehicle cigarette lighter: 12V dc |
