S-1000-24 Single Output 24v Switching Power Supply

A single output 24v Switching Power Supply is a power conversion device used to convert the input power (usually AC) into a stable power product with a required output voltage (usually DC). It has high efficiency, high stability and good power protection function, and is widely used in various electronic equipment and industrial control systems.

Contact us

Feature

  • Soft-start current can reduce the AC input impact effectively
  • With short-circuit and overload protection
  • 100% full-load burn-in test
  • Installed with EMI filter, minimum wave

 

Specification

Model S-1000-24
OUTPUT DC VOLTAGE 24V
RATED CURRENT 42A
CURRENT RANGE 0 ~ 42A
RATED POWER 1000W
RIPPLE&NOISE(Max) 280mVp-p
VOLTAGE ADJ.RANGE 21.6 ~ 26.4V
VOLTAGE TOLERANCE ±1.0%
LINE REGULATION ±0.5%
LOAD REGULATION ±0.5%
SETUP,RISE TIME 1000ms,50ms
HOLD UP TIME(Typ.) 20ms (full load)
INPUT VOLTAGE RANGE 85 ~ 132VAC/170~264VAC by switch 240~370VD
FREQUENCY RANGE 47~63Hz
EFFICIENCY(Typ.) 0.84
AC CURRENT(Typ.) 11.6A/115V 5.8A/230VAC
INRUSH CURRENT(Typ.) COLDSTART: 30A/115V 60A/230V
LEAKAGE CURRENT <3.5mA/ 240VAC
PROTECTION OVER
LOAD
115 ~ 135% rated output power
Protection tye:Hiccup mode,recovers automatically after fault condition is removed
OVER
VOLTAGE
27.6 ~ 32.4V
Protection type : Shut off o/p voltage, clamping by zener diode
ENVIRONMENT WORKING TEMP -10 ~ +60°C (Refer to derating curve )
WORKING HUMIDITY 20~90%RH non-condensing
STORAGETEMP.,HUMIDITY -20 ~ +85°C, 20 ~ 95% RH
TEMP.COEFFICIENT ±0.03%/°C (0 ~ 50°C)
VIBRATION 10 ~ 500Hz, 2G 10min/1cycle,60min.eachX、Y、Zaxes
SAFETY SAFETY STANDARDS GB4943.1, EN60950.1APPROVED
WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100MOhms/500VDC
EMC EMISSION Compliance toEN61000-3-2:2014/EN61000-3-3:2013
EMC IMMUNITY Compliance toEN55032:2015/EN55035:2017/60950-1
OTHERS MTBF ≥720.6K hrs MIL-HDBK-217F(25°C)
DIMENSION 342*132*68mm (L*W*H)