schneider capacitor

Schneider Capacitor Heavy Duty Powerlogic PFC Capacitor

Schneider capacitor are a reliable and flexible solution for power factor correction in stringent operating conditions. These capacitors are particularly used for higher voltage disturbances or when a few non-linear loads are present. The rated current of the capacitors must be in increased in order to cope with the circulation of the harmonic current. This capacitor provides a rated output power of 50 kVar at 400V AC, 50 Hz. Fastening assured by a ClampTite terminal. This component meet the standards IEC 60831-1 and IEC 60831-2. The case product weight is 5.3 kg.

Contact us
Category:

Features

  • Reliable solution for power factor correction under severe operating conditions
  • Especially suitable for higher voltage disturbances or in the presence of non-linear loads
  • The rated current is larger to deal with the circulating current of harmonic current
  • Provides a rated output power of 50 kVar at 400V AC, 50 Hz
  • Fastened with ClampTite terminals
  • Conforms to IEC 60831-1 and IEC 60831-2 standards
  • Box product weight is 5.3 kg

 

Application

  • Frequency converters
  • Inverter based home appliances
  • Solar inverters
  • Variable speed motor drives

Specification

Main
Range of product PowerLogic
Product or component type Heavy duty capacitor
Network frequency 50/60 Hz
Series name HDuty
Network harmonic content <= 20 %
Electrical parameters 45.1 kvar 380 V 50 Hz
50 kvar 400 V 50 Hz
53.8 kvar 415 V 50 Hz
Maximum permissible voltage 1.1 x Un (8 hours over 24 hours)
continuous overcurrent capacity 1.8 x In
Rated voltage 380…415 V AC 50/60 Hz
Complementary
Dielectric losses < 0.2 W/kvar
Power losses < 0.5 W/kVAr
Capacitance tolerance – 5 % to 10 %
Voltage test 2.15 x Un AC between terminals for 10 s
<= 660 V – 3 kV AC between terminal and container for 10 s
>= 660 V – 6 kV AC between terminal and container for 10 s
Inrush current 250 x In
Maximum switching operation per year 7000
Service life in hours 130000 h
Dielectric material Metallized polypropylene film with Zn/Al alloy, special resistivity & profile, special edge (wave cut)
Impregnation material Non-PCB dry PUR resin
Biodegradable
Type of installation Indoor installation
Connections – terminals Stud terminals
Mounting mode Upright/horizontal
Diameter 136 mm
Height 321 mm
Product weight 5.3 kg
Environment
Standards IEC 60831-2
IEC 60831-1
IP degree of protection IP00
Operating altitude 2000 m
Temperature class D
Ambient air temperature for operation -25…55 °C
Relative humidity 95 %
Contractual warranty
Warranty 18 months

 

 

 

Related products