110v DC Rectifier

SET110-20A 110V DC Rectifier System

110v DC Rectifier :

1. Power supply modules of series SET- 220V/110V are compact battery charging rectifiers with rear side connectivity. The rectifiers are designed for high voltage Power Plants and Substations. Due to the modular concept and a high scalability the user is able to equip the power supply with additional modules according to his actual power profile. The chargers are very user friendly and can be swapped as well as upgraded during system operation.

2. The devices get their operation parameters via the system RS 485 communication bus. After a successful login a central monitoring unit controls and monitors the devices. In case of interruption due to failure of monitoring unit the modules operate continuously with internal default values.Therefore the supply of the connected loads and the charging of the batteries are guaranteed without any interruption. Step less temperature control fan speed & change with the output power of module, which minimize noise & extend fan life.The rectifier needs a 1Ph AC mains connection.

3. Rectifier power circuit is divided into active PFC & DC to DC converter which can make the wide input voltage range (85V-290V) & high efficiency.High power density has reached the international advanced level.

Contact us
Category:

Feature:

1. LED indication for On / Fault status

2. Protection for Input and output over /under voltage, over temperature, and short circuit

3. “Hot plug-in” design with back plane connection

4. High power density, RS485 Interface for Remote Adjusting, Controlling, Measuring and Signaling.

5. High Efficiency with low EMI. CE Safety and EMC certification

Applications

1. Power supply for all medium to high power DC loads

2. Telecommunication.

3. Rectifiers in DC systems with battery backup

4. Industrial control systems.

5. Charging and buffering of stationary batteries in electrical power plants

Specification

 Input

Type 220V/10A 110V/20A
Model No. SET-220V/10A SET-110V/20A
Input voltage 85-290VAC (Nominal 180-290VAC)
Input current 13.6A
Input frequency range 45 Hz-65 Hz
Power Factor ≥ 0.99 at P nom ≥ 75%

Output

Nominal output voltage (Vnom) 220VDC 110VDC
Adjustable output voltage range 190-300VDC 95-150VDC
Voltage Stabilization Accuracy              ± 0.5%
Current Stabilization Accuracy 　            ± 1 %
Nominal output current (Inom) 10ADC@300VDC 20A DC@150VDC
Efficiency ≥ 95 %
Charge characteristic line IU Characteristic according to
DIN41772/DIN41773
Default value of the charging 240V 120V
voltage
O/p Overvoltage Vo> (factory 302V 151V
set)
Voltage ripple ≤ 200 mV
Dynamic accuracy of the <3% of Venom at load change
charging voltage from 10% -90%-10% ;Transient
time<50 ms
Short circuit protection 15% – 30% of Inom when in short
circuit
Parallel operation Yes .Current Sharing ± 3%

110V or 220V DC Rectifier System Mechanical

Type 220V/10A 110V/20A
Model No. SET-220V/10A SET-110V/20A
Weight approx. 2.4 kgs
Dimensions (W/H/D) 103x88x261
Type of enclosure / IP 20
Protection class
Color (front panel) Front Black

110V or 220V DC Rectifier System Technial Data 

Communications interface RS 485
Ambient temperature Operation: -20° to+55° C ,
 Storage:-40° to +70° C
Humidity ≤ 90 % RH
Cooling Fan Cooled
Climatic conditions IEC-68-2-2, IEC-68-2-3, IEC-68-2-6
Max. Installation altitude ≤2000 m
Audible noise < 50 db
Connections AC Input DC Output and Signalization at rear
CE conformity Yes
Compliance to EMC standards EN61000-4-2, EN-61000-4-6,                           EN-61000-4-3, EN-61000-4-12
Air Pressure 70-106 Pa
Insulation Resistance Input Chassis & Output > 10M Ohms at 500VDC
Dielectric strength 2000V between Input, Output & Chassis for 1Min.

Related products