Feature of Eaton Recloser Control
- Fully compatible with all Eaton electronically controlled three-phase reclosers
- Enhanced processing power, memory capacity, and data sampling support simple to advanced applications utilizing ProView NXG software and WorkBench NXG
- Extensive diagnostics and communications tools facilitate monitoring and analysis of the system and the control and enable flexible, upgradable communications capabilities
- Integrated security tools help prevent cyber intrusions and unauthorized access and are capable of evolving to meet emerging threats to the distribution infrastructure
- Integrated security protocols and encryption secure digital communications, helping to thwart cyberattacks that could disable extensive portions of the distribution grid
- Modular, flexible, and scalable architecture and expansion bays to accommodate easy field upgrades and new feature implementation
- Expandability facilitates faster development and easier delivery of new features and updates, affording the flexibility and agility to meet today’s requirements and future needs, both planned and unexpected
Specifications of Eaton Recloser Control
| Description | Information |
| Cabinet rating | IP44 |
| Operating range temperature | -40 °C to +55 °C ambient |
| Heater rating | 100 W |
| Control input power | 120 or 240 Vac up to 12 AWG wire size |
| Power usage (Watts) | 15 W (no accessories) |
| Operating AC voltage range | 85-264 Vac universal input |
| Input fuse ratings | Fuses on power supply board: 5A 250 Vac, Time delay fuse, 50 A interrupting
Optional input power fuses: 5 A, 250 Vac, Time delay fuse, 10 kA interrupting at 120 Vac, 750 A interrupting at 250 Vac |
| Battery rating / backup power | 24 Vdc, 13 Ahr |
| Battery charge rate | 450 mA bulk charge with trickle capability |
| GFCI rating / max voltage & current | 120 Vac only, 15 A fuse. Same fuse used as input power fuse accessory |
| Current measurement accuracy (control alone)*† | IA, IB, IC, IN: From 0.01 A to 2 A ±400 μA plus ± 0.1% of reading |
| PT voltage input range (sensing) 37-pin | ≤ 285 Vrms; 1 Mohm input impedance |
| LEA voltage input range (sensing) | 0.7–8 Vrms; 200 Kohm input impedance |
| IVS voltage input range (sensing) 14-, 19-, 26-pin | 1–40 Vrms; 90.9 Kohm input impedance |
| Voltage measurement accuracies (PT)
37-pin 14-, 19-, 26-pin |
±0.5 V plus ± 0.5% of reading ±0.2% of reading |
| LEA accuracy (control alone) 37-pin | ±0.2% of reading |
| IVS accuracy (control alone) 14-, 19-, 26-pin | ±0.2% of reading |
| Lindsey sensor compatibility:
120 Vac output—, 1 Mohm Low-voltage output—1 Mohm |
Compatible with 37-pin, 26-pin, 19-pin, 14-pin Compatible with 26-pin, 19-pin, 14-pin |
| Storage temperature range | -40 °C to +85 °C |
| Native contact input rating (voltage) | 12–250 Vdc: 2 mA
12–240 Vac (250 Vac maximum): 2 mA |
| Auxiliary contact input rating (voltage) | 12–250 Vdc: 2 mA
85–240 Vac (250 Vac maximum): 2 mA |
| Native and auxiliary contact output rating (maximum current value) | Refer to catalog |
| Contact input maximum pickup time (native and auxiliary) | 12 ms (for DC or AC inputs) |
| Contact input maximum release time (native and auxiliary) | 17 ms (for DC), 40.34 ms (for AC) |
| Auxiliary power supply rating | 13.2 Vdc, 40 W continuous (75 W surge) |
| System frequency | 60 Hz |
| USB host port (left USB) | USB 2.0 |
| USB device port (right USB) | USB 2.0 |
| * Accuracies specified at 25 °C and at nominal system frequency. | |
| † Current measurements listed in secondary amps. | |
Application of Eaton Recloser Control
It is used for Mainline sectionalizing, Automatic reconfiguration, PeerComm communication protocol automation, Loop sectionalizing, Sectionalizing laterals, Power quality monitoring, and Automatic source transfer.
