ADRV-08 Digital Timer With ON/OFF Delay

The ADRV-08 digital timer is a high-performance timer with ON/OFF delay function, suitable for a wide range of industrial and commercial applications. This type of timer is usually designed to provide precise time control, and the start delay (ON Delay) and end delay (OFF Delay) can be set as needed to implement complex automation control strategies. This type of product is ideal for applications requiring precise time control, such as machine operations, process control, HVAC systems, etc.

Contact us
Category:

Usage and Working Principle

 

Display: Displayed here while setting the time and counting down the set time. If the operating time is set in minutes, the

rightmost point of the display flashes while the device is counting the time. t Knob: To set the working time value, move the knob

to the desired value. When setting the time, the set time is displayed on the screen. (If the time is changed while the device is

counting time, the device continues to count the new time set.) x Knob: To set the time range, move the“x” knob to the desired

value. The right side is reserved x Knob: To set the time range move the“x” knob to the desired value.9.9 sec., 99 sec., 9.9 min.,

99 min., 9.9 hours., 99 hours 6 different periods can be set. When the time range is set while the device is powered, the

The device must be de-energized and re-energized for the adjusted time range to be valid.

 

Maintenance

 

Switch off the device and release from connections. Clean the trunk of the device with a swab. Don’t use any conductor or chemical

might damage the device. Make sure the device works after cleaning

 

Warnings

 

Please use the device according to the manual. Don’t use the device in wet. Include a switch and circuit breaker in the assembly.

Put the switch and circuit breaker near the device, and the operator can reach it easily. Mark the switch and circuit breaker as releasing a connection for the device.

 

Technical Parameters:

 

Type ADRV-08 ADRV-10
Operating Voltage 150V-260VAC 24V DC,or110VAC 24V DC 110Vor230VAC(A1-A2)or24VAC/DC(A2-A3
Function ON Delay                                 ON Delay or OFF Delay
Operating Frequency 50/60Hz
Operating Power <4VA <6VA
Ambient   Conditions;Humidity
 20……+55℃
Time
9.9(sec),99(sec),9.9(min)
99(min),9.9(hr),99(hours)
 0.1(sec)~99(min)
Display
01×2 digit,on led and out(RLY )led
Output contact 5A/250VAC (Resistive Load)
Mounting Assembld on the din rail
Operating Altitude c2000mete
Weigh 79g
Cable Diameter 2.5mm

 

Installation dimensions and wiring requirements

Related products