Features
- Measure Voltage Difference, Phase Angle Difference, Frequency Difference
- True RMS Measurements
- Relay Output
- ANSI Case
- Touch Screen Graphic Display
Applications
- For data synchronization between databases
- Data synchronization across different platforms
- Synchronize the data generated in real time to the data analysis platform
- Real-time analysis and report generation
- Data backup and recovery
- Synchronize data between different applications for data sharing and process integration
- Synchronize data between different cloud service providers
- Achieving Data Consistency in Multi-Cloud Environments
Specification
| Parameter | Value |
| lnput voltage (nominal) | 100-500V Line-Line |
| lnput voltage Burden | 0.2VA nominal |
| Max Inputvoltage | 600V Line-Line |
| Overload Withstand | 2Xnominal voltage for 1 sec. repeated 10 times at 10 second intervals |
| Frequency Range | 45 to66 Hz |
| Response Time | Approx.1second forstep input |
| lsolation | 2kV rms for 1 minute, between running &incoming circuits |
| Accuracy | |
| Voltage Difference | ±1% of nominal value |
| Phase Angle Difference | ±2degrees |
| Temperature Coefficient | 0.05%/deg |
| Output | |
| Relay Contacts | Form A(NO) |
| Contact Rating | 240V AC,5 Amp |
| General | |
| Operating Temperature | -10~+55°C,<95% RHnon-condensing |
| Storage Temperature | -20 to +65℃ |
| Warmup Time | 3 minutes minimum |
| Rating: | CAT lll, pollution degree 2 |
| Protection | lP54 front |
| Enclosure | Polycarbonate front and case |
| Dimensions | 4.31″ x 4.31″” x 1.55″ depth (114x114x39mm) |
| Panel Cut Out | 4.06″(103mm) diameter.4 stud positions |
