Ethernet Remote IO

M240 Ethernet Remote IO

This M240 Ethernet Remote IO is a 4-channel discrete input module with RS485. It provides isolation between each channel of inputs, power, and network circuits. Network communication adheres to the industry-standard RS-485 Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals. Not only works as an independent signal isolator with communication but combines with MWG1 to constitute a remote I/O DAS support both of MODBUS RTU and MODBUS TCP protocols.

Contact us
Category:

Features

  • Substitute the analog isolator into the communication isolator
  • Six-way isolation eliminates potential ground loops between power, Input,output, and network circuitry
  • Hot Swappable
  • Terminal Block & Rail bus redundant power
  • Standard Modbus RTU protocol with high-speed RS-485 communication (up to 115K bps)
  • Combine with MWG1 to constitute a remote I/O DAS support both of MODBUS RTU and MODBUS TCP protocols

Specification

Parameter Value
Input Signal Type Discrete
Input Channel 4 Channels
Detect loop power RS485
Communication Modbus
Protocol RTU
Baud Rate 115200,38400，19200…4800bps （config.  by DIP）
Address ID 1-31（config. by DIP）
RS485 Drive Capacity Max. 64nodes
Power Supply 24VDC±10% or AC
Response Time ≦10 mS
Power Loss ≤ 1.5W (24VDC)
Temperature Drift 0.01%/Celsius degree
Operation Temperature -10~70°C
Relative Humidity 5-95% non condensing

Dimension

 

 

 

 

 

 

 

Related products