Features of ATEC MDM3100
- LCD
- Measure over 60 parameters.
- RS-485 port, Modbus RTU communication protocol
- Dual-energy pulse output
- Harmonic analysis (optional), up to 63th
- 8 channels of digital remote signals
- 4 channels programmable analog output
- 4 channels relay output
- Profibus communication (optional)
- Ethernet networking communication(optional)
- Data memory(optional)
Specifications of ATEC MDM3100
| Current Input | |||||
| Input Current:0～5A (Current value can be set up)
Measurement scope:0.5%～120%In Overload capacity:2 X rated continuously,100A/1s non continuously Power consumption:≤0.2VA per phase |
|||||
| Voltage Input | |||||
| Input Voltage:0～400VAC (L-N),0～693VAC(L-L)(Voltage value can be set up)
System frequency:45～65Hz Measurement scope:3%～120%Un Overload Capacity:2 X rated continuous, 2500V/1s non continuous Power consumption:≤0.5VA per phase |
|||||
| Switch Status (optional) | |||||
| Input Channels:
Input Type: Isolated Voltage: |
8 channels
Dry contact 2500VAC |
||||
| Relay Output (optional) | |||||
| Output Channels | 4 channels programmable | ||||
| Output Type | Mechanic contact, constant on output | ||||
| Contact Capacity | 5A/250VAC | ||||
| Analog Output (optional) | |||||
| No. of outputs | 4 channels programmable | ||||
| Output signal | 4～20mA or 0～5V | ||||
| Response time | ≤400ms | ||||
| Pulse Output (standard) | |||||
| No. of outputs | 2 channels(active/reactive energy each) | ||||
| Serial com. Port (standard) | |||||
| No. of outputs | 1 RS-485 port | ||||
| Communication protocol | Modbus-RTU protocol | ||||
| Baud rate | 2400,4800,9600,19200,38400 bps | ||||
| Profibus com. Module (optional) | |||||
| No. of Channels | 1channel | ||||
| Communication protocol | Profibus-DP protocol | ||||
| Ethernet networking Module (optional) | |||||
| No. of outputs | 1 channel 10M/100M adaptive | ||||
| Communication protocol | TCP/IP protocol | ||||
| Other parameters | |
| Auxiliary Power | 85~265VAC/DC |
| Display module | LCD display luminosity can be adjusted |
| Temp. drifting factor
Withstand Voltage(input against output ) Total power consumption Operation temperature Storage temperature Operation humidity Pollution Class Material of housing |
<100PPM/℃
2500V/1min <8VA -20℃~60℃ -40℃~85℃ 5~95%RH 2 Class Flammability acc. To UL94V0 |
| Main unit | 96 x 96 x 86mm |
| Dimensional Size: Main unit+ module | 96 x 96 x 122mm |
| Installation Size: | 91 x 91mm |
