Schneider Multifunction Meter EM6400 Conzerv Power and Energy meter

The Schneider Multifunction Meter EM6400 measures THD and individual harmonics (in accordance with IEC61557-12), which aids in power quality monitoring. This conzerv multifunction meter gives users the ability to record anomalies in the system along with a time and date stamp. The multifunction meter conzerv em6400(EM6400NG )boasts a wide LED display that allows for the simultaneous monitoring of numerous electrical parameters, thus aiding in readings.

Contact us

Specification of Schneider Multifunction Meter EM6400

 [Us] rated supply voltage 40…300 V AC 45…65 Hz
40…300 V DC
Network frequency 60 Hz
50 Hz
[In] rated current 5 A
1 A
type of network 3P
2P
2P + N
1P + N
3P + N
Maximum power consumption in VA 6 VA at 277 V between phase and neutral
Maximum power consumption in W 2 W at 277 V
Display type 7 segments LED
Display colour Red
Messages display capacity 3 fields of 4 characters
Display digits 12 digit(s) – 14.2 mm in height
communication of data Net energy
Energy metering
Reading of time-stamped measurements and events
Total energy
Tamperproof of settings Protected by access code
Sampling rate 64 samples/cycle
Measurement current 5…6000 mA
Signal Current 0…12 A (impedance 0.3 MOhm)6 x
Voltage (impedance 5 MOhm)4 x
Measurement voltage 35…480 V AC 45…65 Hz between phases
35…277 V AC 45…65 Hz between phase and neutral
35…600 V AC 45…65 Hz between phases
35…347 V AC 45…65 Hz between phase and neutral
600…999000 V AC 45…65 Hz with external VT
Frequency measurement range 45…65 Hz
Measurement accuracy Current +/- 0.5 %
Voltage +/- 0.5 %
Power +/- 0.5 %
Frequency +/- 0.05 %
Power factor +/- 0.01
Accuracy class Class 1 active energy conforming to IEC 62053-21
Class 2 reactive energy conforming to IEC 62053-23
Class 5P harmonic distorsion (I THD & U THD) conforming to IEC 61557-12
Class 5P individual harmonics up to the 15th conforming to IEC 61557-12
Number of outputs 0
Demand intervals Configurable from 1 to 60 min
Information displayed Voltage (min/max)
Current (min/max)
Power factor (min/max)
Frequency (min/max)
Active power (min/max)
Apparent power (min/max)
Reactive power (min/max)
Time (min/max)
Demand current (past value)
Demand current (present value)
Demand power (past value)
Demand power (present value)
Local signalling Green LED: activity
Red LED: output signal 1…9999000 pulse/ k_h (kWh, kVAh, kVARh)
Green LED: communication status
Communication port protocol Modbus at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none – 2 wires, insulation 2500 V
Communication port support RS485
data recording Time stamping
Energy consumption logs
Min/max of instantaneous values
Material Polycarbonate
Flame retardance V-0 conforming to UL 94
Mounting mode Panel-mounted
Flush-mounted
Mounting support Framework
Fixing mode By clamp
installation category III
Type of installation Indoor installation
Measurement category Category III 480 V
Category II 480…600 V
Electrical insulation class Class II
Standards IEC 61010-1:ed. 3
UL 61010-1:ed. 3
Product certifications CE conforming to IEC 61010-1
CULus conforming to UL 61010-1
CULus conforming to CSA C22.2 No 61010-1
C-Tick
Width 96 mm
Depth 73 mm panel:
13 mm outside:
Height 96 mm
Net weight 600 g